KRRASS PBS-50T/1600 press brake
The KRRASS PBS-50T/1600 is a hybrid press brake with 50 t of pressing force and a 1,600 mm bending length.
Specifications
| Drive System | Hybrid |
|---|---|
| CNC controller | DELEM 69S, DELEM 66S or ESA S875 (AdvancedBend); DELEM 58Tx, DELEM 53Tx or ESA S840 (StandardBend) |
| Bending length | 1,600 mm |
| Pressing force | 50 t |
| Distance between side frames | 1,250 mm |
| Maximum opening | 540 mm |
| Maximum stroke | 160 mm |
| Throat depth | 205 mm |
Not published by KRRASS for this model: Synchronisation, Frame type, Closing speed, Maximum working speed, Return speed.
In KRRASS’s words
“DELEM 69S Intuitive visual programming dramatically reduces learning curve and labor dependency. DELEM 66S Full HD industrial touchscreen with responsive multi-point interaction. ESA S875 Dual 21.5-inch touchscreens and supports DXF import, enabling intuitive 3D control.”
“DELEM 58Tx 15-inch high-resolution color TFT display with 2D graphical programming and automatic bend sequence calculation. DELEM 53Tx Compact 10.1-inch touchscreen with form-based numerical programming and hot-key navigation for quick setup. ESA S840 15.6-inch widescreen touch interface with interactive 2D graphic editor and automatic sequencing.”
Where these figures come from
Read from the specification table on KRRASS’s product page at krrass.com (row “50T/1600”) on 27 October 2026. Values are copied cell by cell and never estimated; force given in kN is divided by 10 for tonnes, and a working-speed range is shown by its upper value.
Similar machines from other makers
Within 15% of the pressing force and 10% of the bending length.