ADH WAD-50T/1600 press brake
The ADH WAD-50T/1600 is a hydraulic press brake with 50 t of pressing force and a 1,600 mm bending length. Each side of the ram (Y1/Y2) is controlled separately.
Specifications
| Drive System | Hydraulic |
|---|---|
| Synchronisation | Y1/Y2 (each side controlled) |
| CNC controller | Delem DA-53T, DA-58T, DA-66T or DA-69T; ESA S640 optional |
| Bending length | 1,600 mm |
| Pressing force | 50 t |
| Distance between side frames | 1,300 mm |
| Maximum opening | 460 mm |
| Maximum stroke | 150 mm |
| Throat depth | 250 mm |
| Closing speed | 160 mm/s |
| Maximum working speed | 18 mm/s |
| Return speed | 200 mm/s |
Not published by ADH for this model: Frame type.
In ADH’s words
“Independent Y1/Y2 control for CNC bending. Choose from 50T–300T models, with tooling, controls and handling matched to your parts.”
“Choose Delem DA-53T, DA-58T, DA-66T or DA-69T, with ESA S640 optional. Demonstrate the programming, language, transfer and interface functions required for your work.”
Where these figures come from
Read from the specification table on ADH’s product page at adhmt.com (row “WAD-50T/1600”) on 27 October 2026. Values are copied cell by cell and never estimated; force given in kN is divided by 10 for tonnes, and a working-speed range is shown by its upper value.
Similar machines from other makers
Within 15% of the pressing force and 10% of the bending length.