TRUMPF TruBend 7050 press brake
The TRUMPF TruBend 7050 is an electric press brake with 50 t of pressing force and a 1,530 mm bending length.
Specifications
| Drive System | Electric |
|---|---|
| CNC controller | TruBend Touchpoint |
| Bending length | 1,530 mm |
| Pressing force | 50 t |
| Distance between side frames | 1,305 mm |
| Maximum opening | 385 mm |
| Throat depth | 250 mm |
| Maximum working speed | 25 mm/s |
Not published by TRUMPF for this model: Synchronisation, Maximum stroke, Frame type, Closing speed, Return speed.
In TRUMPF’s words
“TruBend Touchpoint is the simple interface for operating your bending machine.”
Where these figures come from
Read from the specification table on TRUMPF’s product page at trumpf.com (model “TruBend 7050”) on 28 October 2026. Values are copied cell by cell and never estimated; force given in kN is divided by 10 for tonnes.
Similar machines from other makers
Within 15% of the pressing force and 10% of the bending length.