SENFENG All-electric BDE2010 press brake
The SENFENG All-electric BDE2010 is an electric press brake with 20 t of pressing force and a 1,000 mm bending length.
Specifications
| Drive System | Electric |
|---|---|
| CNC controller | Delem, ESA or Cybelec |
| Bending length | 1,000 mm |
| Pressing force | 20 t |
| Distance between side frames | 830 mm |
| Maximum opening | 430 mm |
| Throat depth | 300 mm |
| Closing speed | 200 mm/s |
| Maximum working speed | 30 mm/s |
| Return speed | 200 mm/s |
Not published by SENFENG for this model: Synchronisation, Maximum stroke, Frame type.
In SENFENG’s words
“SENFENG offers CNC control systems from three globally recognized brands—Delem, ESA, and Cybelec—featuring intuitive interfaces, proven reliability, and precise motion control.”
Where these figures come from
Read from the specification table on SENFENG’s product page at senfenglaser.com (row “BDE2010”) on 27 October 2026. Values are copied cell by cell and never estimated; force given in kN is divided by 10 for tonnes, and a working-speed range is shown by its upper value.