Wode WM1030 press brake
The Wode WM1030 is a hydraulic press brake with 100 t of pressing force and a 3,000 mm bending length.
Specifications
| Drive System | Hydraulic |
|---|---|
| CNC controller | NC9 |
| Bending length | 3,000 mm |
| Pressing force | 100 t |
| Distance between side frames | 2,550 mm |
| Maximum opening | 370 mm |
| Maximum stroke | 100 mm |
| Throat depth | 400 mm |
Not published by Wode for this model: Synchronisation, Frame type, Closing speed, Maximum working speed, Return speed.
In Wode’s words
“数控系统采用NC9数控系统。”
Where these figures come from
Read from the specification table on Wode’s product page at worldjj.com.cn (row “WM1030”) on 27 October 2026. Values are copied cell by cell and never estimated; force given in kN is divided by 10 for tonnes, and a working-speed range is shown by its upper value.
Similar machines from other makers
Within 15% of the pressing force and 10% of the bending length.