SENFENG Hybrid BDE10032 press brake
The SENFENG Hybrid BDE10032 is a hybrid press brake with 100 t of pressing force and a 3,200 mm bending length. Each side of the ram (Y1/Y2) is controlled separately.
Specifications
| Drive System | Hybrid |
|---|---|
| Synchronisation | Y1/Y2 (each side controlled) |
| CNC controller | Delem, ESA or Cybelec |
| Bending length | 3,200 mm |
| Pressing force | 100 t |
| Distance between side frames | 2,600 mm |
| Maximum opening | 480 mm |
| Throat depth | 400 mm |
| Closing speed | 180 mm/s |
| Maximum working speed | 10 mm/s |
| Return speed | 160 mm/s |
Not published by SENFENG for this model: Maximum stroke, Frame type.
In SENFENG’s words
“Electro-hydraulic servo system with compact cylinder spacing for high synchronization accuracy and efficient power output.”
“SENFENG offers CNC control systems from three globally recognized brands—Delem, ESA, and Cybelec—featuring intuitive interfaces, proven reliability, and precise motion control.”
Where these figures come from
Read from the specification table on SENFENG’s product page at senfenglaser.com (row “BDE10032”) on 27 October 2026. Values are copied cell by cell and never estimated; force given in kN is divided by 10 for tonnes, and a working-speed range is shown by its upper value.
Similar machines from other makers
Within 15% of the pressing force and 10% of the bending length.