KRRASS EPP-70/2050 press brake
The KRRASS EPP-70/2050 is an electric press brake with 60 t of pressing force and a 2,050 mm bending length.
Specifications
| Drive System | Electric |
|---|---|
| CNC controller | DELEM 69S, DELEM 66S or Syntec PA-15TX |
| Bending length | 2,050 mm |
| Pressing force | 60 t |
| Distance between side frames | 1,700 mm |
| Maximum opening | 470 mm |
| Maximum stroke | 180 mm |
| Throat depth | 305 mm |
Not published by KRRASS for this model: Synchronisation, Frame type, Closing speed, Maximum working speed, Return speed.
In KRRASS’s words
“DELEM 69S High-end visual programming for complex bending, helping reduce setup time and operator learning curve. DELEM 66S Industrial touchscreen control with clear 2D/3D workflow support for accurate repeat production. PA-15TX The Syntec PA-15TX combines servo control and bending process management with expandable hardware interfaces, M3/ECAT communication, and flexible touch panel options for more convenient press brake operation.”
Where these figures come from
Read from the specification table on KRRASS’s product page at krrass.com (row “70/2050 ★”) on 27 October 2026. Values are copied cell by cell and never estimated; force given in kN is divided by 10 for tonnes, and a working-speed range is shown by its upper value.
Similar machines from other makers
Within 15% of the pressing force and 10% of the bending length.