About PG SRL

PG SRL was set up in 2000 in Mariano Comense, in the Brianza engineering district of the province of Como: it first bent sheet for others and then began building the machines itself. Design, assembly and testing stay in its own plant; the frames are welded in-house, with Bosch Rexroth hydraulics, ESA controls and Promecam-standard tooling.

PG says it does not sell from a catalogue: force, length, stroke, daylight, throat and axes are sized to the customer's most critical part. It reports more than 500 machines installed in over 20 countries, a 24-month warranty and delivery in 4 to 8 months.

  • 2000Founded
  • 500+Machines installed
  • 20+Countries served
  • 40–3,000 tDCA force range

The PG SRL Press Brake Range

    DCA

    Hydraulic, built to order from 40 to 3,000 t and up to 16.2 m.
    Built to order; PG publishes force × length combinations and stroke, opening and throat ranges, not standard models.

    H.DCA

    Servo-hydraulic, 65 to 320 t, up to 6.2 m.
    Built to order; PG publishes force × length combinations and stroke, opening and throat ranges, not standard models.

    E.DCA

    Servo-electric with no hydraulic oil, 40 to 200 t.
    Built to order; PG publishes force × length combinations and stroke, opening and throat ranges, not standard models.

    PG-LAT roofing

    Long presses for thin roofing sheet, 110 to 300 t and 6.5 to 12.5 m.
    Built to order; PG lists six force ratings in four lengths, not standard models.

    Tandem DCA

    Two or three synchronised DCA presses, up to 24 m and 6,000 t.
    Engineered per project; no standard models.

Company information, specifications and images from PG SRL press brakes, DCA hydraulic, H.DCA hybrid, E.DCA electric, PG-LAT roofing, Tandem DCA, About PG SRL, Sales network, retrieved 28 October 2026. PG SRL says it delivers anywhere in Italy or Europe and that its machines work across Italy and Europe; it reports more than 20 countries served but names no market outside Europe, so it is listed in Europe only.