Maximum bending width 300mm
Pressure capacity 800kg or more
Bottom dead center approx. 2t
stroke 16mm
Bending method bevel type
punch Split type (6 types)
Width 10, 15, 20, 40, 80, 160mm
For example, if you want the total length of the punch to be 65mm, use a combination of 10, 15, and 40mm punches.
If you want the total length to be 67mm, leave a 1mm gap between each punch.
The same goes for die.
Maximum bending width 300mm
Pressure capacity 800kg or more
Bottom dead center approx. 2t
stroke 16mm
Bending method bevel type
punch Split type (6 types)
Width 10, 15, 20, 40, 80, 160mm
For example, if you want the total length of the punch to be 65mm, use a combination of 10, 15, and 40mm punches.
If you want the total length to be 67mm, leave a 1mm gap between each punch.
The same goes for die.
Image 1 of 4
Image 2 of 4
Image 3 of 4
Image 4 of 4