Yawei PBA-160/3100 press brake
The Yawei PBA-160/3100 is a hydraulic press brake with 160 t of pressing force and a 3,100 mm bending length. Each side of the ram (Y1/Y2) is controlled separately.
Specifications
| Drive System | Hydraulic |
|---|---|
| Synchronisation | Y1/Y2 (each side controlled) |
| Bending length | 3,100 mm |
| Pressing force | 160 t |
| Distance between side frames | 2,600 mm |
| Maximum opening | 550 mm |
| Maximum stroke | 215 mm |
| Throat depth | 410 mm |
| Closing speed | 200 mm/s |
| Maximum working speed | 13 mm/s |
| Return speed | 160 mm/s |
Not published by Yawei for this model: CNC controller, Frame type.
In Yawei’s words
“Equipped with a fully closed-loop electro-hydraulic servo synchronization control system imported from Germany.”
Where these figures come from
Read from the specification table on Yawei’s product page at en.yawei.cc (row “PBA-160/3100”) on 27 October 2026. Values are copied cell by cell and never estimated; force given in kN is divided by 10 for tonnes, and a working-speed range is shown by its upper value.
Similar machines from other makers
Within 15% of the pressing force and 10% of the bending length.