SENFENG Hybrid BDE60060 press brake
The SENFENG Hybrid BDE60060 is a hybrid press brake with 600 t of pressing force and a 6,000 mm bending length. Each side of the ram (Y1/Y2) is controlled separately.
Specifications
| Drive System | Hybrid |
|---|---|
| Synchronisation | Y1/Y2 (each side controlled) |
| CNC controller | Delem, ESA or Cybelec |
| Bending length | 6,000 mm |
| Pressing force | 600 t |
| Distance between side frames | 4,800 mm |
| Maximum opening | 670 mm |
| Throat depth | 600 mm |
| Closing speed | 90 mm/s |
| Maximum working speed | 7 mm/s |
| Return speed | 90 mm/s |
Not published by SENFENG for this model: Maximum stroke, Frame type.
In SENFENG’s words
“Electro-hydraulic servo system with compact cylinder spacing for high synchronization accuracy and efficient power output.”
“SENFENG offers CNC control systems from three globally recognized brands—Delem, ESA, and Cybelec—featuring intuitive interfaces, proven reliability, and precise motion control.”
Where these figures come from
Read from the specification table on SENFENG’s product page at senfenglaser.com (row “BDE60060”) on 27 October 2026. Values are copied cell by cell and never estimated; force given in kN is divided by 10 for tonnes, and a working-speed range is shown by its upper value.
Similar machines from other makers
Within 15% of the pressing force and 10% of the bending length.