HACO SynchroMaster 50250 press brake
The HACO SynchroMaster 50250 is a hydraulic press brake with 250 t of pressing force and a 5,000 mm bending length.
Specifications
| Drive System | Hydraulic |
|---|---|
| CNC controller | EASYBEND |
| Bending length | 5,000 mm |
| Pressing force | 250 t |
| Distance between side frames | 4,050 mm |
| Maximum opening | 520 mm |
| Maximum stroke | 270 mm |
| Throat depth | 400 mm |
| Closing speed | 100 mm/s |
| Maximum working speed | 8 mm/s |
| Return speed | 90 mm/s |
Not published by HACO for this model: Synchronisation, Frame type.
In HACO’s words
“The SynchroMaster comes standard with the intuitive EASYBEND graphical control.”
“HACO EASYBEND control for SynchroMaster”
Where these figures come from
Read from the specification table in HACO’s PDF at haco.com (model “50250”) on 28 October 2026. Values are copied cell by cell and never estimated; force given in kN is divided by 10 for tonnes.
Similar machines from other makers
Within 15% of the pressing force and 10% of the bending length.