HACO SynchroMaster 25150 press brake
The HACO SynchroMaster 25150 is a hydraulic press brake with 150 t of pressing force and a 2,600 mm bending length.
Specifications
| Drive System | Hydraulic |
|---|---|
| CNC controller | EASYBEND |
| Bending length | 2,600 mm |
| Pressing force | 150 t |
| Distance between side frames | 2,100 mm |
| Maximum opening | 520 mm |
| Maximum stroke | 270 mm |
| Throat depth | 400 mm |
| Closing speed | 200 mm/s |
| Maximum working speed | 10 mm/s |
| Return speed | 125 mm/s |
Not published by HACO for this model: Synchronisation, Frame type.
In HACO’s words
“The SynchroMaster comes standard with the intuitive EASYBEND graphical control.”
“HACO EASYBEND control for SynchroMaster”
Where these figures come from
Read from the specification table in HACO’s PDF at haco.com (model “25150”) on 28 October 2026. Values are copied cell by cell and never estimated; force given in kN is divided by 10 for tonnes.
Similar machines from other makers
Within 15% of the pressing force and 10% of the bending length.