HACO EuroMaster-S 25075 press brake
The HACO EuroMaster-S 25075 is a hydraulic press brake with 75 t of pressing force and a 2,600 mm bending length.
Specifications
| Drive System | Hydraulic |
|---|---|
| CNC controller | FASTBEND-2D MT |
| Bending length | 2,600 mm |
| Pressing force | 75 t |
| Distance between side frames | 2,100 mm |
| Closing speed | 150 mm/s |
| Maximum working speed | 10 mm/s |
| Return speed | 100 mm/s |
Not published by HACO for this model: Synchronisation, Maximum opening, Maximum stroke, Frame type, Throat depth.
In HACO’s words
“EuroMaster-S comes standard with the intuitive FASTBEND-2D MT control.”
“The control is entirely developed and manufactured by HACO.”
Where these figures come from
Read from the specification table in HACO’s PDF at haco.com (model “25075 °”) on 28 October 2026. Values are copied cell by cell and never estimated; force given in kN is divided by 10 for tonnes.
Similar machines from other makers
Within 15% of the pressing force and 10% of the bending length.