Bystronic Xpert 400/6200 press brake
The Bystronic Xpert 400/6200 is a press brake with 400 t of pressing force and a 6,200 mm bending length.
Specifications
| CNC controller | BySoft Cell Control Bend |
|---|---|
| Bending length | 6,200 mm |
| Pressing force | 400 t |
| Distance between side frames | 5,100 mm |
| Maximum opening | 550 mm |
| Maximum stroke | 265 mm |
| Throat depth | 400 mm |
| Closing speed | 120 mm/s |
| Maximum working speed | 10 mm/s |
| Return speed | 100 mm/s |
Not published by Bystronic for this model: Drive System, Synchronisation, Frame type.
In Bystronic’s words
“You can operate the intelligent BySoft Cell Control Bend software as easily as your smartphone.”
Where these figures come from
Read from the specification table in Bystronic’s PDF at btp.bystronic.com (model “Xpert 400/6200”) on 28 October 2026. Values are copied cell by cell and never estimated; force given in kN is divided by 10 for tonnes; a published range is shown by its upper value.
Similar machines from other makers
Within 15% of the pressing force and 10% of the bending length.