Aliko SP4200-500F press brake
The Aliko SP4200-500F is a hydraulic press brake with 500 t of pressing force and a 4,200 mm bending length.
Specifications
| Drive System | Hydraulic |
|---|---|
| CNC controller | Cybelec Visitouch 19 |
| Bending length | 4,200 mm |
| Pressing force | 500 t |
| Distance between side frames | 3,520 mm |
| Closing speed | 120 mm/s |
| Maximum working speed | 10 mm/s |
| Return speed | 100 mm/s |
Not published by Aliko for this model: Synchronisation, Maximum opening, Maximum stroke, Frame type, Throat depth.
In Aliko’s words
“The CNC-control for Aliko press brakes has been provided by The Swiss Cybelec SA since 1985.”
“The powerful Cybelec Visitouch 19 control makes operator’s work easier”
Where these figures come from
Read from the specification table in Aliko’s PDF at aliko.fi (model “SP4200-500F”) on 28 October 2026. Values are copied cell by cell and never estimated; force given in kN is divided by 10 for tonnes; a published range is shown by its upper value.
Similar machines from other makers
Within 15% of the pressing force and 10% of the bending length.