Axial Syncro 504 press brake
The Axial Syncro 504 is a press brake with 500 t of pressing force and a 4,080 mm bending length.
Specifications
| CNC controller | Visi Touch |
|---|---|
| Bending length | 4,080 mm |
| Pressing force | 500 t |
| Distance between side frames | 3,600 mm |
| Maximum stroke | 365 mm |
Not published by Axial for this model: Drive System, Synchronisation, Maximum opening, Frame type, Throat depth, Closing speed, Maximum working speed, Return speed.
In Axial’s words
“El control Visi Touch es una novedosa serie fruto de la avanzada electrónica actual y se incorpora en la plegadora Syncro.”
Where these figures come from
Read from the specification picture on Axial’s product page at axialmaquinaria.com (model “Syncro 504”) on 28 October 2026. Values are copied cell by cell and never estimated.
Similar machines from other makers
Within 15% of the pressing force and 10% of the bending length.