ADIRA PH 50070 press brake
The ADIRA PH 50070 is a hydraulic press brake with 500 t of pressing force and a 7,050 mm bending length.
Specifications
| Drive System | Hydraulic |
|---|---|
| CNC controller | Adcontrol 40 |
| Bending length | 7,050 mm |
| Pressing force | 500 t |
| Distance between side frames | 6,150 mm |
| Maximum opening | 530 mm |
| Maximum stroke | 250 mm |
| Throat depth | 400 mm |
| Closing speed | 80 mm/s |
| Maximum working speed | 8.5 mm/s |
| Return speed | 75 mm/s |
Not published by ADIRA for this model: Synchronisation, Frame type.
In ADIRA’s words
“Adcontrol 40 standard”
Where these figures come from
Read from the specification table in ADIRA’s PDF at adira.pt (model “50070”) on 28 October 2026. Values are copied cell by cell and never estimated; force given in kN is divided by 10 for tonnes.
Similar machines from other makers
Within 15% of the pressing force and 10% of the bending length.