ADH WC67K/E-80t/2500 press brake
The ADH WC67K/E-80t/2500 is a hydraulic press brake with 80 t of pressing force and a 2,500 mm bending length. A torsion bar keeps the two sides of the ram in step.
Specifications
| Drive System | Hydraulic |
|---|---|
| Synchronisation | Torsion bar (mechanical) |
| Bending length | 2,500 mm |
| Pressing force | 80 t |
| Distance between side frames | 2,050 mm |
| Maximum opening | 380 mm |
| Maximum stroke | 120 mm |
| Throat depth | 250 mm |
| Closing speed | 110 mm/s |
| Maximum working speed | 10 mm/s |
| Return speed | 80 mm/s |
Not published by ADH for this model: CNC controller, Frame type.
In ADH’s words
“WC67K/E uses a mechanical torsion bar to synchronize the ram. Programmed positioning, tool selection and the operator workflow determine how it fits your bending work.”
Where these figures come from
Read from the specification table on ADH’s product page at adhmt.com (row “WC67K/E-80t/2500”) on 27 October 2026. Values are copied cell by cell and never estimated; force given in kN is divided by 10 for tonnes, and a working-speed range is shown by its upper value.
Similar machines from other makers
Within 15% of the pressing force and 10% of the bending length.