ADH WC67K-300T/4000 press brake
The ADH WC67K-300T/4000 is a hydraulic press brake with 300 t of pressing force and a 4,000 mm bending length. A torsion bar keeps the two sides of the ram in step.
Specifications
| Drive System | Hydraulic |
|---|---|
| Synchronisation | Torsion bar (mechanical) |
| Bending length | 4,000 mm |
| Pressing force | 300 t |
| Distance between side frames | 3,100 mm |
| Maximum opening | 580 mm |
| Maximum stroke | 250 mm |
| Throat depth | 400 mm |
| Closing speed | 100 mm/s |
| Maximum working speed | 8 mm/s |
| Return speed | 75 mm/s |
Not published by ADH for this model: CNC controller, Frame type.
In ADH’s words
“WC67K/E uses a mechanical torsion bar to synchronize the ram. Programmed positioning, tool selection and the operator workflow determine how it fits your bending work.”
Where these figures come from
Read from the specification table on ADH’s product page at adhmt.com (row “WC67K-300T/4000”) on 27 October 2026. Values are copied cell by cell and never estimated; force given in kN is divided by 10 for tonnes, and a working-speed range is shown by its upper value.
Similar machines from other makers
Within 15% of the pressing force and 10% of the bending length.