ADH WADG-10T/500 press brake
The ADH WADG-10T/500 is an electric press brake with 10 t of pressing force and a 500 mm bending length. Each side of the ram (Y1/Y2) is controlled separately.
Specifications
| Drive System | Electric |
|---|---|
| Synchronisation | Y1/Y2 (each side controlled) |
| Bending length | 500 mm |
| Pressing force | 10 t |
| Distance between side frames | 510 mm |
| Maximum opening | 420 mm |
| Maximum stroke | 150 mm |
| Throat depth | 200 mm |
| Closing speed | 180 mm/s |
| Maximum working speed | 30 mm/s |
| Return speed | 180 mm/s |
Not published by ADH for this model: CNC controller, Frame type.
In ADH’s words
“Servo motors drive the ram through a belt and precision screw system, without a hydraulic power unit. Independent Y1/Y2 feedback monitors the left and right drive positions.”
Where these figures come from
Read from the specification table on ADH’s product page at adhmt.com (row “WADG-10T/500”) on 27 October 2026. Values are copied cell by cell and never estimated; force given in kN is divided by 10 for tonnes, and a working-speed range is shown by its upper value.