ADH WADE-50T/1300 press brake
The ADH WADE-50T/1300 is a hydraulic press brake with 50 t of pressing force and a 1,300 mm bending length. Each side of the ram (Y1/Y2) is controlled separately.
Specifications
| Drive System | Hydraulic |
|---|---|
| Synchronisation | Y1/Y2 (each side controlled) |
| CNC controller | ACS930H, ACS930S or ACS990 |
| Bending length | 1,300 mm |
| Pressing force | 50 t |
| Distance between side frames | 1,120 mm |
| Maximum opening | 460 mm |
| Maximum stroke | 150 mm |
| Throat depth | 250 mm |
| Closing speed | 160 mm/s |
| Maximum working speed | 13 mm/s |
| Return speed | 160 mm/s |
Not published by ADH for this model: Frame type.
In ADH’s words
“Programmed bending with closed-loop Y1/Y2 control. WADE offers 50T/1300 to 300T/6000 models and a choice of ACS controllers.”
“ACS930H, ACS930S and ACS990 are WADE controller options. The selected controller coordinates the bend program and supported axes, with different software and interface capabilities.”
Where these figures come from
Read from the specification table on ADH’s product page at adhmt.com (row “WADE-50T/1300”) on 27 October 2026. Values are copied cell by cell and never estimated; force given in kN is divided by 10 for tonnes, and a working-speed range is shown by its upper value.
Similar machines from other makers
Within 15% of the pressing force and 10% of the bending length.