ADH WAD-600T/4000 press brake
The ADH WAD-600T/4000 is a hydraulic press brake with 600 t of pressing force and a 4,000 mm bending length. Each side of the ram (Y1/Y2) is controlled separately.
Specifications
| Drive System | Hydraulic |
|---|---|
| Synchronisation | Y1/Y2 (each side controlled) |
| Bending length | 4,000 mm |
| Pressing force | 600 t |
| Distance between side frames | 3,100 mm |
| Maximum opening | 650 mm |
| Maximum stroke | 320 mm |
| Throat depth | 600 mm |
| Closing speed | 80 mm/s |
| Maximum working speed | 8.5 mm/s |
| Return speed | 85 mm/s |
Not published by ADH for this model: CNC controller, Frame type.
In ADH’s words
“A reinforced WAD platform for long and high-force forming, with electro-hydraulic synchronization and crowning configured to the load case.”
Where these figures come from
Read from the specification table on ADH’s product page at adhmt.com (row “WAD-600T/4000”) on 27 October 2026. Values are copied cell by cell and never estimated; force given in kN is divided by 10 for tonnes, and a working-speed range is shown by its upper value.
Similar machines from other makers
Within 15% of the pressing force and 10% of the bending length.