ADH WAD-220T/5000 press brake
The ADH WAD-220T/5000 is a hydraulic press brake with 220 t of pressing force and a 5,000 mm bending length. Each side of the ram (Y1/Y2) is controlled separately.
Specifications
| Drive System | Hydraulic |
|---|---|
| Synchronisation | Y1/Y2 (each side controlled) |
| CNC controller | Delem DA-53T, DA-58T, DA-66T or DA-69T; ESA S640 optional |
| Bending length | 5,000 mm |
| Pressing force | 220 t |
| Distance between side frames | 4,000 mm |
| Maximum opening | 480 mm |
| Maximum stroke | 200 mm |
| Throat depth | 450 mm |
| Closing speed | 160 mm/s |
| Maximum working speed | 9 mm/s |
| Return speed | 105 mm/s |
Not published by ADH for this model: Frame type.
In ADH’s words
“Independent Y1/Y2 control for CNC bending. Choose from 50T–300T models, with tooling, controls and handling matched to your parts.”
“Choose Delem DA-53T, DA-58T, DA-66T or DA-69T, with ESA S640 optional. Demonstrate the programming, language, transfer and interface functions required for your work.”
Where these figures come from
Read from the specification table on ADH’s product page at adhmt.com (row “WAD-220T/5000”) on 27 October 2026. Values are copied cell by cell and never estimated; force given in kN is divided by 10 for tonnes, and a working-speed range is shown by its upper value.
Similar machines from other makers
Within 15% of the pressing force and 10% of the bending length.