SENFENG H4 3015H vs HSG G3015H
SENFENG H4 3015H and HSG G3015H are fiber lasers with sources up to 30 kW and the same positioning speed, 200 m/min.
| Specification | SENFENG H4 3015H | HSG G3015H | Difference |
|---|---|---|---|
| Working length (X) | 3,080 mm | 3,100 mm | 20 mm |
| Working width (Y) | 1,530 mm | 1,550 mm | 20 mm |
| Laser power | 6–30 kW | 3–30 kW | |
| Maximum positioning speed | 200 m/min | 200 m/min | Same |
| Maximum acceleration | 2 g | 4 g | 2 g |
| Positioning accuracy | ±0.05 mm | Not provided | |
| Repeatability | ±0.02 mm | Not provided | |
| Maximum sheet weight | 3,000 kg | Not provided | |
| Source | senfenglaser.com, 27 October 2026 | hsglaser.com, 27 October 2026 |
What differs
HSG G3015H publishes the higher acceleration, 4 g against 2 g, which matters most when cutting many small parts.
Power options start at 6 kW on the SENFENG and 3 kW on the HSG. The SENFENG bed is 3,080 × 1,530 mm and the HSG bed 3,100 × 1,550 mm.
SENFENG also publishes positioning accuracy (±0.05 mm), repeatability (±0.02 mm) and a 3,000 kg sheet load; HSG does not publish these for the G3015H, so ask for them before comparing further.
How this page was made
- Both columns come from the makers’ own specification tables; nothing is estimated, and a value a maker does not publish is shown as Not provided.
- Sources: HSG (hsglaser.com, read 27 October 2026); SENFENG (senfenglaser.com, read 27 October 2026). Each machine links to its own page with the source row.
- The text was drafted with an AI model (Claude, from Anthropic) from these figures only, checked against the table by Claude (AI) on 28 October 2026. Counts and values in the text are computed from the table.