LVD PPEB 220/61 Plus press brake
The LVD PPEB 220/61 Plus is a hydraulic press brake with 220 t of pressing force and a 6,100 mm bending length.
Specifications
| Drive System | Hydraulic |
|---|---|
| CNC controller | Touch-B |
| Bending length | 6,100 mm |
| Pressing force | 220 t |
| Distance between side frames | 5,050 mm |
| Maximum opening | 570 mm |
| Maximum stroke | 300 mm |
| Throat depth | 400 mm |
| Closing speed | 120 mm/s |
| Maximum working speed | 21 mm/s |
| Return speed | 200 mm/s |
Not published by LVD for this model: Synchronisation, Frame type.
In LVD’s words
“The servo-hydraulic system ensures that the piston at each end of the ram reaches the programmed position established in the Touch-B control.”
“LVD breakthrough products include CADMAN® software, Touch series CNC controller, Easy-Form® Laser adaptive bending system, and Synchro-Form XXL press brake.”
Where these figures come from
Read from the specification table on LVD’s product page at lvdgroup.com (model “220/61 Plus”) on 28 October 2026. Values are copied cell by cell and never estimated; force given in kN is divided by 10 for tonnes.
Similar machines from other makers
Within 15% of the pressing force and 10% of the bending length.