KRRASS WC67K-125T/3200 press brake
The KRRASS WC67K-125T/3200 is a hydraulic press brake with 125 t of pressing force and a 3,200 mm bending length. A torsion bar keeps the two sides of the ram in step.
Specifications
| Drive System | Hydraulic |
|---|---|
| Synchronisation | Torsion bar (mechanical) |
| CNC controller | E21, E310P, E315PS or ESA S829 |
| Bending length | 3,200 mm |
| Pressing force | 125 t |
| Distance between side frames | 2,600 mm |
| Maximum opening | 400 mm |
| Maximum stroke | 150 mm |
| Throat depth | 320 mm |
| Closing speed | 90 mm/s |
| Return speed | 82 mm/s |
Not published by KRRASS for this model: Frame type, Maximum working speed.
In KRRASS’s words
“KRRASS torsion-bar press brakes use a thick, full-length mechanical connecting bar to synchronize the left and right hydraulic cylinders.”
“E21 Simple control for X-axis back gauge, ram stroke, and multi-step bending jobs. E310P 4-axis CNC for X/Y/R/C and servo backgauge control. Auto-calculates bend depth from angle, material, thickness, and tooling. E315PS Practical control for torsion-bar press brakes and everyday bending jobs. ESA S829 Touchscreen ESA-S829 control for 2-axis NC press brakes. Pairs with ESA servo motor and precision backgauge setup.”
“WC67K-100T3200 Press Brake Machine with Estun E310P Control and Manual Crowning”
Where these figures come from
Read from the specification table on KRRASS’s product page at krrass.com (row “125T/3200”) on 27 October 2026. Values are copied cell by cell and never estimated; force given in kN is divided by 10 for tonnes, and a working-speed range is shown by its upper value.
Similar machines from other makers
Within 15% of the pressing force and 10% of the bending length.