Gizelis G Bend ® plus 3080 press brake
The Gizelis G Bend ® plus 3080 is a hydraulic press brake with 80 t of pressing force and a 3,400 mm bending length.
Specifications
| Drive System | Hydraulic |
|---|---|
| CNC controller | CybTouch8 |
| Bending length | 3,400 mm |
| Pressing force | 80 t |
| Distance between side frames | 3,050 mm |
| Maximum opening | 515 mm |
| Maximum stroke | 250 mm |
| Throat depth | 400 mm |
| Closing speed | 180 mm/s |
| Maximum working speed | 20 mm/s |
| Return speed | 160 mm/s |
Not published by Gizelis for this model: Synchronisation, Frame type.
In Gizelis’s words
“2D graphic controller, 8” color Touch-Screen,2D graphic controller, 8” color Touch-Screen,CybTouch8”
Where these figures come from
Read from the specification table in Gizelis’s PDF at gizelis.com (model “G Bend ® plus 3080”) on 28 October 2026. Values are copied cell by cell and never estimated; a published range is shown by its upper value.
Similar machines from other makers
Within 15% of the pressing force and 10% of the bending length.