Aliko SP3000-220F press brake
The Aliko SP3000-220F is a hydraulic press brake with 220 t of pressing force and a 3,000 mm bending length.
Specifications
| Drive System | Hydraulic |
|---|---|
| CNC controller | Cybelec Visitouch 19 |
| Bending length | 3,000 mm |
| Pressing force | 220 t |
| Distance between side frames | 2,320 mm |
| Throat depth | 500 mm |
| Closing speed | 120 mm/s |
| Maximum working speed | 10 mm/s |
| Return speed | 110 mm/s |
Not published by Aliko for this model: Synchronisation, Maximum opening, Maximum stroke, Frame type.
In Aliko’s words
“The CNC-control for Aliko press brakes has been provided by The Swiss Cybelec SA since 1985.”
“The powerful Cybelec Visitouch 19 control makes operator’s work easier”
Where these figures come from
Read from the specification table in Aliko’s PDF at aliko.fi (model “SP3000-220F”) on 28 October 2026. Values are copied cell by cell and never estimated; force given in kN is divided by 10 for tonnes; a published range is shown by its upper value.
Similar machines from other makers
Within 15% of the pressing force and 10% of the bending length.